Australian supplier of Pedestrian Fence panels
COMPLIES WITH RMS SPECIFICATIONS
FACTORY DIRECT, 100% AUSTRALIAN STEEL
AVAILABLE FOR FAST DELIVERY AUSTRALIA WIDE
MODULAR PANELS EASILY REPLACED IF DAMAGED BY A VEHICLE
ENCAT is an Australian manufacturer of Pedestrian Fences. We can supply pedestrian fence panels to councils, shopping centres, schools or supply commercial fencing contractors from our stock held in Australia.
We can do custom designs of pedestrian fence panels to improve the local amenity of an area so they can fit into the local aesthetics of the installation. These fence panels can be used on verge or median road streps. Our team is able to design a custom made graphic overlay that can fit each panel to give it a unique look. In the examples shown, the pedestrian fence panels were used in a shopping area mixed with stores and cafes.
Originally designed by the Roads and Maritime Services, a pedestrian fence is designed to prevent pedestrians walking onto or crossing a road at a mid point. It can change the walking patterns of pedestrians along roads or busy footpaths. It can also be used to keep people safe, these decorative panels were placed outside a busy cafe area.
There are six different styles of pedestrian fence each with the same key benefit of separating pedestrians from vehicular traffic. The main difference is in the aesthetics of each type. As soon as new pedestrian fencing is installed, it changes walking patterns immediately, the physical barrier forces different movement patterns in the area.
The other benefit of using pedestrian fencing is in the case of a vehicular accident it can help arrest some of the energy from the moving vehicle by deforming on impact. All the pedestrian fence panels ENCAT makes are;
- Made to Australian standards
- Comply with Council & RMS standards.
- Welded by qualified welders.
- Made in NSW with delivery available Australia Wide
- Hot dipped galvanised
- Are modular so they can be easily replaced if damaged
- Powder coated in any colour required
- Are available in either in-ground or base-plate mounting
- Custom designs available
- Can be made to be fitted on a slop or curve
Compliant Pedestrian Fencing
Fencing Panel Post Intermediate Baseplates specifications
- Material: Hot Dip Galvanised Steel
- Colour: Powder coated any colour or hot dip galvanised finish
- Weight: 28kg
- Height: 1366mm
- Supplied: Comes with 2 x M10x50mm galvanised bolts, nuts, washers.
Additional information about ENCAT's Pedestrian Fence Decorative Panel
ENCAT is Australia’s largest manufacturer and supplier for all types of Pedestrian Fences and we make the fencing in our factory in NSW. We actively supply commercial fencing contractors, civil works contractors, councils or government department tenders that need a safety fence installed on for roads. ENCAT can design and manufacture Type 1, Type 2, Type 3, Type 4, Type 5 and Type 6 fence types. These products are commonly referred to as an RMS Pedestrian Fence or Pedestrian Safety Fence Panel. We only manufacture fence panels that are as specified by the NSW RMS or Roads Waterways Transport for NSW.
The purpose of a pedestrian fence
The function of this type of fence construction is to help create safer movement patterns of roadside users. They are a physical barrier that we make using 100% recycled Australian steel that are used to direct pedestrians to safe crossing areas. It stops people from accessing areas of the road corridor where they may interact with vehicular traffic in an uncontrolled manner.
Typical pedestrian fencing installations
The most common use of pedestrian fencing is around shopping centres where people will try and cross the road to get to their car parking or roadside stores. It is not a road safety barrier and cannot be used in lieu of a road safety barrier. It is not designed to deflect or arrest an errant vehicle or to prevent injury to pedestrians by errant vehicles although it should deform on impact. If the fence panels have been designed and manufactured correctly they should collapse as a whole panel when impacted that minimises the detachment of individual elements, and features a staggered layout of the balusters allowing motorists and pedestrians approaching on opposite sides of the fence to see each other.
What are the variations of fencing?
Prior to 2011 this type of fence was known as RTA pedestrian fence and Type1 pedestrian fence, the naming has changed over time and includes these variations;
- RMS type one pedestrian fencing
- RTA type one pedestrian fencing
- Pedestrian safety barrier type 1
- RTA pedestrian fencing type 1
- RMS pedestrian fencing type 1
- RTA pedestrian fence type 1
- RMS pedestrian fence type 1
- Pedestrian fencing type 1
- Pedestrian fence type 1
- Road fencing type 1
- Road fence type 1
- RTA fencing
- RMS fencing
See some of the civil projects ENCAT has helped to complete in Australia
Botany Council decided to improve the safety of the Molineaux Point look out by installing our Fasterail outdoor steel balustrade system to protect people form falling
We helped the NSW Government Lake Illawarra complete a new pedestrian boardwalk to be shared by people and cyclists with custom made handrailing
This commercial office needed a new compliant outdoor balustrade for their balcony area in Wollongong. We custom-designed the modular panels to suit their site